KTM 125 - Engine Torque Specs and Carburetor Settings; Engine Tightening Torque Specifications; Basic Carburetor Settings

ENGLISH
49
TIGHTENING TORQUES - ENGINE
Flange bolts - cylinder-head M 7 18 Nm
Nuts-cylinder base M 8 30 Nm
Flywheel collar nut M 12x1 60 Nm
Nut for primary sprocket (LH thread) M 16x1.5 180 Nm
Nut for inner clutch hub M 18x1.5 120 Nm
Crankcase and clutch cover bolts M 6 8 Nm
Spark plug M 14x1.25 20 Nm
Swingarm pivot M 14x1.5 100 Nm
Other screws M 6 10 Nm
M 8 25 Nm
M 10 45 Nm
BASIC CARBURETOR SETTING
125 SX
125 EXC EU
125 EXC AUS
200 MXC/EXC USA
200 EXC AUS
200 EXC EU
Carburetor
Carburetor setting number
Main jet
Idling jet
Starting jet
Jet needle
Needle position from top
Throttle valve
Air adjustment screw open
Performance restrictor
Keihin PWK 39
060202
185 (188/190)
48 (45)
85
R 1469 D (R 1470 D)
III
5.5 (6)
1.5
–
Keihin PWK 38 AG
080202
178(180/185)
45 (48)
85
NOZ E (NOZ F)
III
6.5
1.5
–
Keihin PWK 38 AG
100202
180 (178)
35 (45/48)
85
R 1475J (NOZ E/NOZ F)
III
6.5
1.5
slide stop 36mm
200 SX
Keihin PWK 39
090202
190 (188,192)
48 (45)
85
R 1468G (R1469G)
III
5.5
1.5
–
Keihin PWK 38 AG
070202
148 (180/185)
35 (45/48)
85
R 1472 N (NOZ E/NOZ F)
V
6.5
1.5
–