KTM 1290 Super Adventure S 2018 User Manual

13 SERVICE WORK ON THE CHASSIS
210
– Clean and oil the dust boots and inner fork tubes of both fork
legs.
Universal oil spray ( p. 331)
–
Press dust boots
1
back into their installation position.
– Remove excess oil.
Finishing work
– Install front fender. ( p. 208)
– Remove the vehicle from the center stand. ( p. 182)
13.23 Removing the tank cover
Preparatory work
– Take off the passenger seat. ( p. 183)
– Remove the front rider's seat. ( p. 184)
– Remove the front side cover. ( p. 200)

KTM 1290 Super Adventure S 2018 Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1301 cc
Transmission	6-speed
Final Drive	Chain
Front Suspension	WP semi-active suspension USD Ø 48 mm
Rear Suspension	WP semi-active suspension monoshock
Wheelbase	1560 mm
Fuel Capacity	23 liters
Dry Weight	215 kg
Power	160 hp (118 kW) @ 8750 rpm
Torque	140 Nm @ 6750 rpm
Front Brake	2 x 320 mm discs, 4-piston calipers
Rear Brake	267 mm disc, 2-piston caliper
ABS	Bosch 9ME Combined ABS
Traction Control	MTC (Motorcycle Traction Control)
Seat Height	860/875 mm
Tires Front	120/70 R19
Tires Rear	170/60 R17