KTM 1290 Super Adventure S 2018 User Manual

7 COMBINATION INSTRUMENT
92
If the device is not automatically paired with the combina-
tion instrument after approx. 30 seconds:
– Restart combination instrument or Pairing repeat pro-
cedure.
A suitable cellphone can be paired with the combination instru-
ment in the Phone submenu.
7.27.10 Headset Rider (optional)
F01337-01
Condition
• The motorcycle is stationary.
• Function KTM MY RIDE (optional) activated.
• Function Wireless Interface (optional) activated.
• The Bluetooth
®
function should also be activated in the device
to be paired.
– Press the UP or DOWN button until Setup is marked. Press
the SET button to open the menu.
– Press the UP or DOWN button until Bluetooth is marked. Press
the SET button to open the menu.
– Press the UP or DOWN button until Headset Rider is marked.
Press the SET button to open the menu.
– Press the SET button again to confirm the Pairing submenu
item.
– The registered trademark of the rider headset appears on the
combination instrument. Press the SET button to select the

KTM 1290 Super Adventure S 2018 Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1301 cc
Transmission	6-speed
Final Drive	Chain
Front Suspension	WP semi-active suspension USD Ø 48 mm
Rear Suspension	WP semi-active suspension monoshock
Wheelbase	1560 mm
Fuel Capacity	23 liters
Dry Weight	215 kg
Power	160 hp (118 kW) @ 8750 rpm
Torque	140 Nm @ 6750 rpm
Front Brake	2 x 320 mm discs, 4-piston calipers
Rear Brake	267 mm disc, 2-piston caliper
ABS	Bosch 9ME Combined ABS
Traction Control	MTC (Motorcycle Traction Control)
Seat Height	860/875 mm
Tires Front	120/70 R19
Tires Rear	170/60 R17