KTM 1290 Super Duke GT Series - Clock and Date Setting

3 WORK 12
–
Remove ignition key

and close cover

.
3.11 "Clock/Date"
401990-02
Condition
• The vehicle is stationary.
– Press the UP or DOWN button until the "Settings" menu appears on the matrix dis-
play. Pressing the SET button opens the menu.
– Press the UP or DOWN button until "Clock/Date" is highlighted in black on the matrix
display. Pressing the SET button again opens the menu.
– Use the UP or DOWN button to navigate through the menu. Use the SET button to
set the time and date.
If the battery was disconnected from the vehicle, the time and date must be set in the
matrix display.