15 ELECTRICAL SYSTEM 134
L02162-10
Main work
–
Turn socket
counterclockwise.
–
Pull the socket with high beam bulb
out of the headlight housing.
–
Disconnect the socket with the high beam bulb from connector
and remove.
– Connect the new socket with the high beam bulb to the connector.
High beam (H9/socket PGJ19-5) ( p. 177)
L02165-10
– Position the socket with the high beam bulb in the headlight housing.
– Turn the socket clockwise.
– Check that the lighting is functioning properly.
To Next Page
Loading...
