KTM 2016 RC 250 - Chassis Tightening Torques

To Next Page

To Previous Page

23 TECHNICAL DATA 179

Fitted length 304 mm (11.97 in)

23.9 Chassis tightening torques

Exhaust clamp - 19 Nm (14 lbf ft) –

Screw, chain guard EJOT PT

K60x30 4 Nm (3 lbf ft) –

Remaining nuts, chassis M4 3 Nm (2.2 lbf ft) –

Remaining screws, chassis M4 4 Nm (3 lbf ft) –

Screw, EFI control unit M4 3 Nm (2.2 lbf ft) –

Nut, reflector on retaining plate M5 5 Nm (3.7 lbf ft) –

Nut, retaining plate on license plate

holder

M5 4 Nm (3 lbf ft) –

Remaining nuts, chassis M5 5 Nm (3.7 lbf ft) –

Remaining screws, chassis M5 5 Nm (3.7 lbf ft) –

Screw, ABS hose clamp M5 5 Nm (3.7 lbf ft) –

Screw, anti-rotation lock, handlebar stub M5 4 Nm (3 lbf ft) –

Screw, battery compartment M5 4 Nm (3 lbf ft) –

Screw, chain guard M5 7 Nm (5.2 lbf ft) Loctite

204™

Screw, cover in front of battery compart-

ment

M5 4 Nm (3 lbf ft) –

Screw, fuel pump M5 5 Nm (3.7 lbf ft) –

Screw, fuel tank cover M5 4 Nm (3 lbf ft) –

Screw, rollover sensor M5 6 Nm (4.4 lbf ft) Loctite

243™

Screw, side stand switch M5 5 Nm (3.7 lbf ft) Loctite

243™

Screw, tail end lower part M5 4 Nm (3 lbf ft) –

Cap bolt, footrest M6 9 Nm (6.6 lbf ft) –

Related product manuals