14 COOLING SYSTEM
96
400243-10
–
Pour coolant in up to measurement
A
above the radiator fins.
Guideline
10 mm (0.39 in)
Coolant ( p. 124)
K01208-10
–
Loosen screw
2
and wait until coolant escapes without bub-
bles.
–
Mount and tighten screw
2
.
Guideline
Bleeder screw, cylin-
der head
M6 10 Nm (7.4 lbf ft)
400243-10
–
Pour coolant in up to measurement
A
above the radiator fins.
Guideline
10 mm (0.39 in)
Coolant ( p. 124)
K01179-10
–
Mount radiator cap
3
.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
– Always make sure there is sufficient ventilation
when running the engine.
– Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Allow the engine to warm up and cool down again.
Finishing work
– Check the coolant level. ( p. 94)
To Next Page
Loading...
