To Next Page

To Previous Page

14 WHEELS, TIRES

109

V00366-10

Main work

– Press the brake caliper onto the brake disc by hand in order to

push back the brake piston.

Info

Make sure when pushing back the brake piston that you

do not press the brake caliper against the spokes.

–

Remove nut

–

Remove chain adjuster

. Pull out wheel spindle

far

enough to allow the rear wheel to be pushed forward.

– Push the rear wheel forward as far as possible. Remove the

chain from the rear sprocket.

Info

Cover the components to protect them against damage.

Warning

Danger of accidents Damaged brake discs reduce the

braking effect.

– Always lay the wheel down in such a way that the

brake disc is not damaged.

– Holding the rear wheel, withdraw the wheel spindle. Take the

rear wheel out of the swingarm.

Info

Do not operate the foot brake lever when the rear wheel

is removed.

H00936-10

–

Remove spacers

14.4 Installing the rear wheel

Warning

Danger of accidents Oil or grease on the brake discs reduces the braking effect.

– Always keep the brake discs free of oil and grease.

– Clean the brake discs with brake cleaner when necessary.

Questions and Answers:

Need help?

Do you have a question about the KTM 300 EXC 2018 and is the answer not in the manual?

KTM 300 EXC 2018 Specifications

General