KTM 300 EXC 2018 User Manual

11 TUNING THE CHASSIS
58
Guideline
Compression damping
Comfort 18 clicks
Standard 15 clicks
Sport 12 clicks
Info
Turn clockwise to increase damping; turn counter-
clockwise to reduce damping.
11.13 Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork suspension behavior.
E00326-10
(All standard EXC/XC-W models)
–
Turn red adjusting screw
1
clockwise as far as it will go.
Info
Adjusting screw
1
is located at the upper end of
the right fork leg.
The rebound damping is located in right fork
leg REB (red adjusting screw). The compression
damping is located in left fork leg COMP (white
adjusting screw).
– Turn counterclockwise by the number of clicks correspond-
ing to the fork type.
Guideline
Rebound damping
Comfort 18 clicks
Standard 15 clicks
Sport 12 clicks
Rebound damping
Comfort 18 clicks
Standard 15 clicks
Sport 12 clicks
Info
Turn clockwise to increase damping; turn counter-
clockwise to reduce damping.

KTM 300 EXC 2018 Specifications

General

Displacement	293.2 cm³
Bore x Stroke	72 mm x 72 mm
Transmission	6-speed
Fuel System	Keihin PWK 36S AG
Rear Suspension	WP Xplor PDS Shock Absorber
Seat Height	960 mm
Ground Clearance	370 mm
Weight (without fuel)	103 kg
Engine Type	2-stroke
Frame	Central-Tube Frame
Front Suspension	WP Xplor 48
Front Brake	260 mm disc
Rear Brake	220 mm Disc Brake
Fuel Capacity	9.5 l