Why are the headlight and position light not working on my KTM 390 Adventure 2020 Motorcycle?
If the headlight and position light are not functioning on your KTM Motorcycle, it is possible that fuse 6 is blown. In this case, change the fuses of individual power consumers.
Why aren't the turn signal, brake light, and horn working on my KTM 390 Adventure 2020 Motorcycle?
If the turn signal, brake light, and horn are not functional on your KTM Motorcycle, it could be that fuse 4 or 6 is blown. In this case, change the fuses of individual power consumers.
General| Engine Type | Single-cylinder, 4-stroke |
|---|---|
| Displacement | 373.2 cc |
| Bore x Stroke | 89 mm x 60 mm |
| Power | 43 hp (32 kW) @ 9, 000 rpm |
| Torque | 37 Nm @ 7, 000 rpm |
| Compression Ratio | 12.6:1 |
| Transmission | 6-speed |
| Cooling | Liquid cooled |
| Rear Brake | 230 mm Disc, Single-Piston Caliper |
| Front Tire | 100/90-19 |
| Rear Tire | 130/80-17 |
| Seat Height | 855 mm |
| Ground Clearance | 200 mm |
| Fuel Capacity | 14.5 liters |
| Weight (Dry) | 158 kg |
| Weight (Wet) | 172 kg |
| Fuel System | Electronic Fuel Injection (EFI) |
| Frame | Steel trellis |
| Front Suspension | WP APEX 43 mm USD forks |
| Rear Suspension | WP APEX monoshock |
| Front Brake | 320 mm disc, 4-piston caliper |
| Wheelbase | 1, 430 mm |
Explains the meaning of specific symbols and typographical formats used in the manual.
Specifies intended use, defines misuse, and provides essential general safety instructions.
Identifies risk degrees with symbols and shows the location of important vehicle labels.
Provides crucial advice for safe operation and emphasizes the importance of protective clothing.
Details warranty conditions, service requirements, and recommendations for spare parts.
Shows locations for serial numbers and provides views of vehicle components.
Details switches on the left and right handlebars, including lights, signals, and start buttons.
Explains operation of the fuel tank filler cap, seat lock, and side stand.
Describes clutch lever, hand brake, foot brake lever, shift lever, and side stand.
Describes the combination instrument, its activation, and basic display modes.
Explains warning indicators, their relevance, and how information is displayed.
Details menu navigation, including settings for KTM MY RIDE, Trips/Data, and Bluetooth pairing.
Guides on adjusting handlebar position and windshield height for rider comfort.
Explains how to adjust the clutch and brake levers, and the shift lever.
Provides crucial advice for first use, including break-in procedures and safety.
Offers guidance on shifting, general riding, passenger safety, and handling.
Details proper braking techniques, stopping, parking, and refueling procedures.
Lists scheduled maintenance tasks and their required intervals based on time or mileage.
Explains how to adjust fork damping and shock absorber preload and rebound.
Details checking chain tension, cleaning, and adjusting chain slack.
Covers procedures for removing and installing the front fender.
Explains the ABS system, its modes, and important operational warnings.
Guides on checking and adding brake fluid and checking brake linings.
Details procedures for removing and installing the front and rear wheels.
Explains how to check tire condition, age, and maintain correct pressure.
Covers removing, installing, and charging the 12-V battery.
Guides on changing fuses for various systems and replacing turn signal bulbs.
Explains checking coolant levels, antifreeze, and draining the system.
Details procedures for filling, bleeding, and changing the engine coolant.
Explains how to check and adjust the clutch lever play for optimal operation.
Covers checking engine oil level, changing oil and filter, and adding oil.
Provides instructions and precautions for cleaning the motorcycle safely.
Offers advice on cleaning and maintenance for winter riding, focusing on salt protection.
Lists steps for preparing and storing the motorcycle for extended periods.
Details the procedures required to get the motorcycle ready for use after storage.
Lists possible causes and solutions for engine starting and power issues.
Explains warning lamps and identifies potential causes for electrical system faults.
Provides detailed specifications for the engine, chassis, brakes, and electrical system.
Lists tightening torques, fluid capacities, and types for various vehicle components.
Details specifications for tires, front fork, and shock absorber settings.
Specifies requirements for brake fluid, coolant, and engine oil.
Recommends auxiliary products and explains industry standards like JASO and SAE.
Provides an index of terms, list of abbreviations, and explanations of symbols.
To Next Page