KTM 690 Duke 2018 User Manual

STORAGE 20
205
20.1 Storage
Info
If you want to garage the motorcycle for a longer period, take the following actions.
Before storing the motorcycle, check all parts for function and wear. If service, repairs or replacements
are necessary, you should do this during the storage period (less workshop overload). In this way, you can
avoid long workshop waiting times at the start of the new season.
401058-01
– When refueling for the last time before taking the motorcycle
out of service, add fuel additive.
Fuel additive ( p. 234)
– Refuel. ( p. 85)
– Clean the motorcycle. ( p. 200)
– Change the engine oil and oil filter and clean the oil
screens. ( p. 191)
– Check the antifreeze and coolant level. ( p. 174)
– Check the tire pressure. ( p. 145)
– Remove the battery. ( p. 147)
– Recharge the battery. ( p. 152)
Guideline
Storage temperature of bat-
tery without direct sunshine.
0 … 35 °C (32 … 95 °F)

KTM 690 Duke 2018 Specifications

General

Engine Type	Single-cylinder, 4-stroke
Displacement	690 cc
Torque	74 Nm @ 6, 500 rpm
Compression Ratio	12.7:1
Transmission	6-speed
Fuel System	Electronic fuel injection
Cooling System	Liquid cooled
Front Suspension	WP USD Ø 43 mm
Rear Suspension	WP Monoshock
Seat Height	835 mm
Dry Weight	148.5 kg
Fuel Capacity	14 liters
Bore x Stroke	105 mm x 80 mm
Starter	Electric starter
Front Wheel	3.50 x 17"
Rear Wheel	5.00 x 17"
Front Tire	120/70 ZR 17
Rear Tire	160/60 ZR 17
Power	73 hp (54 kW) @ 8, 000 rpm
Front Brake	Brembo four-piston radial caliper, 320 mm disc
Rear Brake	Brembo single-piston floating calliper, brake disc Ø 240 mm
ABS	Bosch 9M+ Two Channel ABS
Frame	Chromium-Molybdenum steel trellis frame, powder-coated