KTM 690 Duke 2018 User Manual

10 SERVICE SCHEDULE
90
10.3 Recommended work
Every four years
Every year
every 30,000 km (18,600 mi)
every 10,000 km (6,200 mi)
after 1,000 km (620 mi)
Check the frame. ●
Check the swingarm. ●
Check the swingarm bearing for play. ● ●
Check the wheel bearing for play. ● ●
Change the coolant. ( p. 182) ●
Empty the drainage hoses. ○ ● ● ● ●
Check all hoses (e.g. fuel, coolant, bleeder, drainage, etc.) and sleeves for cracking,
leaks, and incorrect routing.
● ● ● ●
Grease all moving parts (e.g., side stand, hand lever, chain, ...) and check for smooth
operation.
○ ● ● ● ●
Check the screws and nuts for tightness. ○ ● ● ● ●
○ One-time interval
● Periodic interval

KTM 690 Duke 2018 Specifications

General

Engine Type	Single-cylinder, 4-stroke
Displacement	690 cc
Torque	74 Nm @ 6, 500 rpm
Compression Ratio	12.7:1
Transmission	6-speed
Fuel System	Electronic fuel injection
Cooling System	Liquid cooled
Front Suspension	WP USD Ø 43 mm
Rear Suspension	WP Monoshock
Seat Height	835 mm
Dry Weight	148.5 kg
Fuel Capacity	14 liters
Bore x Stroke	105 mm x 80 mm
Starter	Electric starter
Front Wheel	3.50 x 17"
Rear Wheel	5.00 x 17"
Front Tire	120/70 ZR 17
Rear Tire	160/60 ZR 17
Power	73 hp (54 kW) @ 8, 000 rpm
Front Brake	Brembo four-piston radial caliper, 320 mm disc
Rear Brake	Brembo single-piston floating calliper, brake disc Ø 240 mm
ABS	Bosch 9M+ Two Channel ABS
Frame	Chromium-Molybdenum steel trellis frame, powder-coated