KTM 690 Enduro R 2017 User Manual

3 WORK 14
3.14 Setting the clock
Condition
The motorcycle is stationary.
401444-01
– Switch on the ignition by turning the ignition key to position ON .
– Press the MODE button repeatedly until the ODO mode is active.
– Keep the MODE button and the SET button pressed simultaneously.
The time display begins to flash.
– Press the MODE button to set the hour.
– Press the SET button to set the minute.
– Keep the MODE button and the SET button pressed simultaneously.
The time is set.
3.15 Setting the kilometers or miles
Info
If the unit is changed, the value is retained and converted accordingly.
Make the setting according to the country.
Condition
The motorcycle is stationary.
400839-01
– Switch on the ignition by turning the ignition key to position ON .
– Press the MODE button repeatedly until the ODO display mode is active.
– Keep the MODE button pressed until the display mode changes from km/h to mph or
from mph to km/h.
Guideline
Activation duration of MODE button 10 s

KTM 690 Enduro R 2017 Specifications

General

Engine Type	Single cylinder, 4-stroke
Displacement	690 cc
Bore x Stroke	102 mm x 84.5 mm
Fuel System	Electronic Fuel Injection
Transmission	6-speed
Front Suspension	WP USD Ø 48 mm
Rear Suspension	WP shock absorber with Pro-Lever linkage
Front Tire	90/90-21
Rear Tire	140/80-18
Seat Height	910 mm
Power	67 hp (50 kW) @ 7500 rpm
Front Brake	300 mm disc
Rear Brake	Single 240 mm disc, 1-piston caliper
ABS	Bosch 9M+ two-channel ABS
Fuel Tank Capacity	13.5 liters
Dry Weight	146 kg