To Next Page
C
Christian McdonaldAug 19, 2025
Why my KTM Motorcycle engine does not turn when the starter button is pressed?
- DDana CabreraAug 20, 2025
If your KTM Motorcycle engine does not turn when you press the starter button, it could be due to several reasons. You may need to carry out the start procedure. The battery might be discharged, so recharge it. A fuse (1, 2, 3, or 4) could be blown, so replace the individual power consumer fuses. The main fuse might be burned out, so replace it. Finally, there might be no ground connection, so check the ground connection.
General
