EasyManuals Logo

KTM 690Supermoto R User Manual

KTM 690Supermoto R
167 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #140 background imageLoading...
Page #140 background image
STORAGE 138
Cover the motorcycle with a porous sheet or blanket.
Info
Do not use non-porous materials since they prevent humidity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Since the engine cannot warm up properly, the water vapor produced during
combustion condenses and causes valves and exhaust system to rust.
Putting into operation after storage
Take the front from the work stand. ( P. 62)
Taking rear from work stand. ( P. 63)
Recharge the battery.b
x ( P. 96)
Install the battery.b
x ( P. 96)
Set the clock. ( P. 34)
Fill up with fuel. ( P. 57)
Carry out checks before putting into operation. ( P. 48)
Make a test ride.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 690Supermoto R and is the answer not in the manual?

KTM 690Supermoto R Specifications

General IconGeneral
Transmission6-speed
Front Tire120/70 ZR 17
Rear Tire160/60 ZR 17
Engine TypeSingle cylinder, 4-stroke
Bore x Stroke80 mm
Fuel SystemElectronic fuel injection
Cooling SystemLiquid cooled
Front SuspensionWP-USD, 48 mm
Rear SuspensionWP monoshock
Front BrakeSingle 320 mm disc, 4-piston caliper
Rear BrakeSingle 240 mm disc, 1-piston caliper
Fuel Capacity13.5 L
StarterElectric
FrameChromoly steel trellis frame

Related product manuals