KTM 890 Adventure 2021 - Handlebar Position and Hand Guard Mounting

SETUP 2
5
Handlebar scale markings
B
are located centrally
between the handlebar clamps.
Info
Keep the installed gap widths equal when tightening.
– Check the handlebar position.
» If the handlebar position is not adjusted as required by the
customer:
– Adjust the handlebar position. ( p. 12)
F02129-01
– Mount the right hand guard.
Guideline
Hand guard fitting M6 6 Nm (4.4 lbf ft)
Hand guard screw M8 25 Nm (18.4 lbf ft)
F02130-01
– Mount the left hand guard.
Guideline
Hand guard fitting M6 6 Nm (4.4 lbf ft)
Hand guard screw M8 25 Nm (18.4 lbf ft)