COOLING SYSTEM 17
237
K01375-10
–
Remove bleeder screw
2
.
– Tilt the vehicle slightly to the right.
– Pour in coolant until it emerges without bubbles at the vent
hole, and then mount and tighten bleeder screw
2
immedi-
ately.
Coolant 1.6 l (1.7 qt.) Coolant ( p. 291)
– Completely fill the radiator with coolant. Mount radiator
cap
1
.
– Rest the vehicle on the side stand.
– Check coolant level in the compensating tank. ( p. 232)
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
– Always make sure there is sufficient ventilation
when running the engine.
– Use effective exhaust extraction when starting or
running the engine in an enclosed space.
– Start the engine and run it until the 5th bar of the temperature
indicator lights up.
– Stop the engine and allow it to cool down.
To Next Page
Loading...
Need help?
General
