19 SERVICE WORK ON THE ENGINE
248
V01236-10
–
Remove screws
3
. Take off oil filter cover
4
with the O-
ring.
–
Pull oil filter
5
out of the oil filter housing.
Lock ring plier (51012011000)
– Allow the engine oil to drain completely.
– Thoroughly clean the parts and the sealing surfaces.
V01237-10
–
Insert new oil filter
5
.
Info
Only insert the oil filter by hand.
–
Oil the O-ring of the oil filter cover. Position oil filter cover
4
.
–
Mount and tighten screws
3
.
Guideline
Screw, oil filter cover M5 6 Nm (4.4 lbf ft)
To Next Page
Loading...
