KTM 890 DUKE R 2022 User Manual

SETUP 2
11
Info
The first charging process may take longer with a new
12-V battery.
– Stow the tool set between the 12-V battery and the front rider's
seat.
– Mount the passenger seat. ( p. 13)
– Unpack and mount the KTM PowerParts included in the deliv-
ery (optional).
Info
Read the accompanying KTM PowerParts fitting instruc-
tions.
– Attach the stickers included in the scope of supply (optional).
– Set time and date.
– Set kilometers or miles.
– Check the headlight setting. ( p. 17)
– Refuel. ( p. 15)
– Position all controls in their exact positions on the handlebar.
Tighten all screws.
– Remove the remaining film, padding, the corrugated card-
board, and the other packaging material.
– Prepare the vehicle according to the specifications in
KTM Dealer.net for handover to the customer.
Info
Transport mode must be deactivated to be able to start
the motorcycle.

KTM 890 DUKE R 2022 Specifications

General

Engine Type	2-cylinder, 4-stroke, parallel twin
Displacement	889 cm³
Transmission	6-speed
Cooling	Liquid cooled
Seat Height	834 mm
Weight (without fuel)	166 kg
Front Suspension	WP APEX 43
Front Tire	120/70 ZR 17
Rear Tire	180/55 ZR 17
Bore x Stroke	90.7 mm x 68.8 mm
Compression Ratio	13.5:1
Fuel System	Electronic Fuel Injection
Final Drive	Chain
Power	121 hp
Torque	99 Nm
Fuel Tank Capacity	14 liters
Rear Suspension	WP APEX
Rear Brake	240 mm disc, single-piston floating caliper
ABS	Bosch 9.1 MP (incl. Cornering-ABS and Supermoto mode)
Frame	Chromoly-steel trellis frame, powder coated
Front Brake	2 x Brembo Stylema four piston, radially mounted calipers
Wheelbase	1, 482 mm