Side stand
Fold the side stand [2] forward to the stop with your foot and put the weight of the motor-
cycle on the stand. Make sure it is standing securely on a firm surface. The side stand is
linked to the safety start system; follow the driving instructions.
2
Tool set
The tool set [1] is located in the storage compartment under the seat.
Shift lever
The shift lever is mounted on the left side of the engine. The position of the gears is shown
in the illustration. Neutral, or the idle speed, is located between first and second gear.
OPERATION INSTRUMENTS »
16
1
2,3,4,5,6
N
1
To Next Page
Loading...
