MAINTENANCE WORK ON FRAME AND ENGINE 96
B00113-01
– Check the chain sliding guard for wear.
» If the chain sliding guard is worn:
–
Change the chain sliding guard. x
– Check the chain sliding guard for tightness.
» If the chain sliding guard is loose:
– Fully tighten the chain sliding guard.
Guideline
Screw, chain sliding
guard
M6 6 Nm
(4.4 lbf ft)
Loctite
®
243™
B00114-01
– Check the chain guide for wear.
» If the chain guide is worn:
–
Change the chain guide. x
– Check the chain guide for tightness.
» If the chain guide is loose:
– Fully tighten the chain guide.
Guideline
Screw, chain guide M6 6 Nm
(4.4 lbf ft)
Loctite
®
243™
To Next Page
Loading...
Need help?
General
