KTM DUKE 125 User Manual

GD-MIP-0011-AD  www.getdata.it  sales@getdata.it
FITTING THE HARNESS – TPS CABLE :
INSTALLAZIONE DEL CABLAGGIO – SENSORE FARFALLA:
1-2 Place the TPS cable (marked TPS) on the right side of the bike, behind the frame pipes (see picture 1) and under the coolant pipe
near the throttle sensor
1-2 Passare il cavo TPS (marcato TPS) dietro ai tubi del telaio e sotto al tubo del refrigerante vicino al sensore farfalla (vedi figura 1):
operare sul lato destro della moto
3-4 Disconnect the OEM TPS connector and connect the GET TPS harness
3-4 Disconnettere i connettori originali ed inserire i connettori del cablaggio GET
WHEN KIT INSTALLATION HAS FINISHED PLEASE REMEMBER TO
CALIBRATE THE ZERO TPS POSITION
UNA VOLTA ULTIMATO IL MONTAGGIO DEL KIT ESEGUIRE LA
PROCEDURA DI CALIBRAZIONE DELLO ZERO TPS
3
4
2
1

KTM DUKE 125 Specifications

General

Displacement	124.7 cc
Transmission	6-speed
Front Suspension	WP APEX 43
Rear Suspension	WP APEX Monoshock
Seat Height	830 mm
Fuel Tank Capacity	13.4 liters
Dry Weight	139 kg
Bore x Stroke	58 mm x 47.2 mm
Compression Ratio	12.8:1
Frame	Steel Trellis Frame, Powder Coated
Ground Clearance	175 mm
Headlight	LED
Tail Light	LED
Engine Type	Single-cylinder, 4-stroke
Max Torque	12 Nm @ 8, 000 rpm
Fuel System	Electronic Fuel Injection
Rear Brake	Disc brake with single-piston floating calliper
Instrumentation	Digital LCD display
Front Brake	Disc brake with four-piston radial fixed calliper
Wheelbase	1, 366 mm