To Next Page
P
Paul HarrisSep 8, 2025
How to fix KTM F5360R1 Motorcycle headlight and position light not working?
- IianrobertsSep 8, 2025
If the headlight and position light are not functioning on your KTM Motorcycle, check fuse 6 and replace it if it's blown.
How to fix KTM F5360R1 Motorcycle headlight and position light not working?
If the headlight and position light are not functioning on your KTM Motorcycle, check fuse 6 and replace it if it's blown.
Why turn signal, brake light, and horn are not functional on KTM F5360R1 Motorcycle?
If the turn signal, brake light, and horn are not functional on your KTM Motorcycle, the cause may be fuse 6 being blown. Replace the fuse.
Why KTM F5360R1 engine turns only if the clutch lever is drawn?
If the engine of your KTM Motorcycle only turns when the clutch lever is drawn, it's likely because the vehicle is in gear. Shift gear to neutral.
Why time is not correctly displayed on KTM Motorcycle?
If the time is not correctly displayed on your KTM Motorcycle, it may be due to fuse 7 being blown. In this case, replace the fuse.
General| Starter | Electric starter |
|---|---|
| Transmission | 6-speed |
| Engine Type | Single cylinder, 4-stroke |
| Bore x Stroke | 95 mm x 72 mm |
| Cooling System | Liquid Cooled |
| Front Suspension | WP USD, 48 mm |
| Rear Suspension | WP monoshock |
| Front Brake | Single disc brake |
| Rear Brake | Single disc brake |
Defines the intended purpose and limitations of the vehicle's design and operation.
Provides essential safety instructions and guidelines for operating the motorcycle safely.
Explains different risk levels (Danger, Warning, Caution, Note) and associated symbols.
Outlines crucial safety measures for operating the vehicle, including rider fitness.
Emphasizes the importance of wearing appropriate protective gear for rider safety.
Details warranty coverage, service requirements, and conditions for maintaining warranty validity.
Explains the importance of regular service and maintenance for optimal performance and longevity.
Specifies the location of the vehicle's unique chassis identification number.
Indicates where the unique engine serial number is stamped on the vehicle.
Overview of the instrument cluster, identifying indicator lamps, display, and function buttons.
Explains various warning notes displayed on the instrument panel and their meanings.
Details the function and meaning of various indicator lamps on the instrument cluster.
Provides essential advice and safety precautions before the first ride.
Details the procedure and limits for running in the engine during the initial phase.
Lists pre-ride checks and maintenance tasks to ensure the vehicle is roadworthy.
Provides step-by-step instructions for safely starting the motorcycle engine.
Explains proper shifting techniques and general riding practices for safe operation.
Details how to apply the brakes correctly and discusses potential issues.
Provides instructions for safely stopping and parking the motorcycle.
Outlines the mandatory service tasks required at specific intervals.
Guides on adjusting the fork's compression damping for desired suspension behavior.
Explains how to adjust the rear shock absorber's spring preload for rider and load.
Guides on how to check and adjust the drive chain tension according to specifications.
Explains the function and components of the ABS system and its warnings.
Details the procedure for changing ABS fuses to resolve electrical issues.
Guides on how to check the engine oil level when the engine is at operating temperature.
Details the procedure for changing engine oil, oil filter, and cleaning oil screens.
A guide to diagnosing common faults, their possible causes, and recommended actions.
Provides detailed technical specifications for the motorcycle's engine.
Lists the specific torque values for various engine assembly screws and bolts.
Lists the specific torque values for various chassis assembly screws and bolts.
