16 MAINTENANCE
ENGLISH
SERVICE INTERVALS
Observe the following for service and maintenance.
The lubricating oil change intervals listed in the table below are for Classes CG-4, CH-4, CI-4 and CF lubricating oils
of API classification with a low-sulfur fuel in use. If the CG-4, CH-4 or CI-4 lubricating oil is used with a high-sulfur fuel,
change the lubricating oil at shorter intervals than recommended in the table below depending on the operating
condition.
[Z482-E, Z602-E, D722-E, D902-E, D1005-E, D1105-E, V1305-E, V1505-E, V1505-TE, D905-EBG,
D1005-EBG, D1105-EBG, V1305-EBG, V1505-EBG]
Interval Item
Ref.
page
Every 50 hours Check of fuel pipes and clamp bands 25
See NOTE Change of engine oil (depending on the oil pan) 28 to 33
Every 100 hours
Cleaning of air cleaner element 38 *1
Cleaning of fuel filter 26
Check of battery electrolyte level 42, 43
Check of fan belt tightness 44
Every 200 hours
Check of radiator hoses and clamp bands 37
Replacement of oil filter cartridge (depending on the oil pan) 32
Check of intake air line -
Every 400 hours Replacement of fuel filter element 27
Every 500 hours
Removal of sediment in fuel tank -
Cleaning of water jacket (radiator interior) -
Replacement of fan belt 44
Every one or two
months
Recharging of battery 42, 43
Every year or every
6 cleanings of air
cleaner element
Replacement of air cleaner element 38 *2
Every 800 hours Check of valve clearance 47
Every 1500 hours Check of fuel injection nozzle injection pressure - *3
Every 3000 hours
Check of turbo charger - *3
Check of injection pump - *3
Every two years
Replacement of battery 42, 43
Replacement of radiator hoses and clamp bands 37
Replacement of fuel pipes and clamps 25 *3
Change of radiator coolant (L.L.C.) 36
Replacement of intake air line - *4
To Next Page
Loading...
