58 SPECIFICATIONS
ENGLISH
A Specifications are subject to change without notice.
Model D1803-M-DI-E V2203-M-DI-E
Type Vertical, water-cooled, 4-cycle diesel engine
Number of cylinders 3 4
Bore and stroke
mm (in.)
87 × 102.4
(3.43 × 4.03)
87 × 92.4
(3.43 × 3.64)
Total displacement
L (cu.in.)
1.826
(111.43)
2.197
(134.07)
Combustion chamber Re-entrant Type (Direct Injection)
SAE Gross Intermittent
kW / rpm
H.P. (SAEJ1349)
(HP / rpm)
28.4 / 2600
(38.1 / 2600)
36.4 / 2800
(48.8 / 2800)
SAE NET Intermittent
kW / rpm
H.P. (SAEJ1349)
(HP / rpm)
27.1 / 2600
(36.3 / 2600)
34.8 / 2800
(46.7 / 2800)
SAE NET Continuous
kW / rpm
H.P. (SAEJ1349)
(HP / rpm)
23.5 / 2600
(31.6 / 2600)
30.2 / 2800
(40.5 / 2800)
Maximum bare speed rpm 2800 3000
Minimum bare idling speed
rpm 850 to 950
Order of firing 1-2-3 1-3-4-2
Direction of rotation Counter-clockwise (viewed from flywheel side)
Injection pump Bosch “K” Type mini pump
Injection pressure
Mpa (kgf/cm
2
, psi)
1st Stage 18.6 (190, 2702)
2nd Stage 22.6 (230, 3271)
Injection timing
(Before T.D.C.)
0.096 rad (5.5°) 0.143 rad (8.2°)
Compression ratio 20
Fuel Diesel Fuel No.2-D
Lubricant
(API classification)
above CF grade
Dimension mm (in.)
(Iength × width × height)
575.9 × 499.0 × 665.0
(22.7 × 19.6 × 26.2)
667.1 × 499.0 × 659.0
(26.3 × 19.6 × 26.0)
Dry weight kg (lbs.) 151 (333) 180 (397)
Starting system Cell starter (with glow plug)
Starting motor 12 V, 1.4 kW
Charging generator 12 V, 480 W
Recommended battery
capacity
12 V, 88 AH