63SPECIFICATIONS
ENGLISH
A Specifications are subject to change without notice.
Model V3300-DI-E V3300-DI-TE
Type Vertical, water-cooled, 4-cycle diesel
Number of cylinders 4
Bore and stroke mm (in.) 98 × 110 (3.86 × 4.33)
Total displacement L (cu.in.) 3.318 (202.49)
Combustion type Direct injection type (E-CDIS)
SAE NET Intermittent
kW / rpm
H.P. (SAE J1349)
(HP / rpm)
53.0 / 2600
(71.1 / 2600)
64.7 / 2600
(86.8 / 2600)
SAE NET Continuous
kW / rpm
H.P. (SAE J1349)
(HP / rpm)
46.0 / 2600
(61.6 / 2600)
56.2 / 2600
(75.3 / 2600)
SAE Standby
kW / rpm
H.P. (SAE J1349)
(HP / rpm)
--- ---
Maximum bare speed rpm 2800
Minimum bare idling speed rpm 775 to 825
Order of firing 1-3-4-2
Direction of rotation Counter-clockwise (viewed from flywheel side)
Injection pump Bosch type mini pump
Injection pressure
Mpa (kgf/cm
2
, psi)
First opening pressure 18.63 (190, 2275)
Second opening pressure 23.54 (240, 3128)
Injection timing (Before T.D.C.) 0.24 rad (14°) 0.23 rad (13°)
Compression ratio 19.5 18.8
Fuel Diesel fuel oil No.2-D
Lubricant
(API classification)
above CF grade
Dimensions mm (in.)
(length × width × height)
713 × 536 × 774
(28.07 × 20.10 × 30.47)
713 × 538 × 791
(28.07 × 21.18 × 31.14)
Dry weight kg (lbs.) 246 (542) 255 (562)
Starting system Cell starter (with air heater)
Starting motor 12 V 2.5 kW
Charging generator 12 V 540 W
Recommended battery capacity
12 V, 112 AH (400 CCA or higher) 0°F
(-17.8°C) SAE rating
To Next Page
Loading...
