EasyManua.ls Logo

Kubota D722-E - Page 98

Kubota D722-E
206 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
S.G
GENERALITES/ALLGEMElNES
68
mm
STROKE
SERIES
WSM,
01
160
(2)
Check
Point
of
Every
50
hours
u
01
09F054
Checking Fuel Pipe
1.
If the clamp
(1)
is
loose, apply oil to the threads
and securely retighten
it.
2.
The fuel pipe
(2)
is
made of rubber and ages
regardless of
the
period of service.
Change
the
fuel pipe together
with
the clamp
every two years.
3.
However, if the fuel pipe and clamp are found to
be damaged or deteriorate earlier than two years,
then change or remedy.
4.
After the fuel pipe and
the
clamp have been
changed, bleed the fuel system.
A
CAUTION
0
Stop the engine when attempting the check and
(1)
Clamp
(2)
Fuel
Pipe
change prescribed above.
(When bleeding fuel system)
1
Fill
the fuel tank
with
fuel, and open the fuel cock
(1).
2.
Loosen the air vent plug
(2)
of
the fuel filter a few
3.
Screw back
the
plug when bubbles do not come
up
4.
Open
the
air vent cock on top
of
the fuel injection
5.
Retighten the plug when bubbles
do
not come up
I
NOTE
0
Always keep the air vent plug on the fuel injection
pump closed except when air
is
vented, or
it
may
cause the engine to stop.
turns.
any more.
pump-
any more.
(1)
FuelCock
(2)
Air
Vent
Plug
5-3
7

Related product manuals