PERIODIC SERVICE36
BChecking Seat Belt and ROPS
1. Always check condition of the seat belt and ROPS
attaching hardware before operating the machine.
2. Replace anything that is frayed or damaged.
BChecking Engine Oil Level
To avoid serious injury:
A Always stop the engine and remove the key
before checking oil.
1. Check engine oil before starting and 5 minutes or more
after the engine has stopped.
2. Wipe dipstick area clean.
3. To check the oil level, remove the dipstick, wipe it
clean, replace it, and draw it out again. Check to see
that the oil level is between the 2 notches.
4. Add new oil to the prescribed level at the oil port if
necessary.
5. When using a different brand or viscosity oil from the
previous one, remove all of the old oil and oil filter.
Never mix 2 different types of oil.
6. Use the proper Engine Oil SAE according to the
ambient temperatures. (See "LUBRICANTS, FUEL
AND COOLANT" in "MAINTENANCE" section.)
Others 1
Check the areas where
previous trouble was
experienced.
---
(1) ROPS
(2) Seat belt
No. Check item
Ref.
Page
(1) Engine oil port
(2) Oil level dipstick
(F) "UPPER LEVEL"
(L) "LOWER LEVEL"
To Next Page
Loading...
