Kubota LX2610 User Manual (English)

Questions and Answers:

B
Brenda RamirezJul 29, 2025
Why is my Kubota LX2610 engine difficult to start?
- C
  crosschristineJul 29, 2025
  If your Kubota Tractor engine is difficult to start or won't start, several factors could be at play. First, ensure there's fuel flow by checking the fuel tank and fuel filter, replacing the filter if needed. Air or water in the fuel system can also be a culprit; tighten the fuel line coupler bolt and nut. In cold conditions, the oil viscosity might be too high, slowing the engine; consider using different viscosity oils or an engine block heater. Lastly, a weak battery can hinder starting; clean the battery cables and terminals, charge the battery, and in cold weather, remove the battery, charge it, and store it indoors, installing it only when you're ready to use the tractor.
N
Nicholas ShawAug 3, 2025
Why is my Kubota LX2610 Tractor engine overheating?
- J
  Jennifer WuAug 4, 2025
  If your Kubota Tractor engine overheats, there are several possible causes. You might be overloading the engine, so try shifting to a lower gear or reducing the load. Check the coolant level and fill the cooling system to the correct level, inspecting the radiator and hoses for leaks. A loose or defective fan belt could also be the issue, requiring adjustment or replacement. Make sure the radiator core or grille screens aren't dirty, removing any trash. Lastly, the coolant flow route might be corroded, in which case you should flush the cooling system.
M
Michelle MartinAug 10, 2025
Why does my Kubota LX2610 have colored exhaust fumes?
- T
  Tony ClarkeAug 10, 2025
  If you notice colored exhaust fumes from your Kubota Tractor, the cause varies with the color. Black fumes suggest you should change the fuel and fuel filter, drain excess oil if needed, and clean or replace the element. If the fumes are blue or white, try heating the muffler by applying a load to the engine, check the injection nozzle, and change the fuel and fuel filter.
C
Craig LittleAug 16, 2025
How to fix insufficient engine power in my Kubota LX2610?
- H
  haaselizabethAug 16, 2025
  If your Kubota Tractor engine has insufficient power, it could be due to insufficient or dirty fuel, so check the fuel system. Another possible cause is a clogged air cleaner; clean or replace the element.
J
Joshua HansenAug 22, 2025
What to do if my Kubota Tractor engine stops suddenly?
- S
  Shari CastroAug 23, 2025
  If your Kubota Tractor engine stops suddenly, the most likely cause is insufficient fuel. Refuel the tractor. If necessary, bleed the fuel system.

Kubota LX2610 Specifications

General

Engine Type	Diesel
Engine Horsepower	24.8 HP
PTO Horsepower	19.5 HP
Transmission Type	Hydrostatic
3-Point Hitch	Category I
Lift Capacity at 24 inches behind lift point	1, 323 lbs
Drive	4WD
Cylinders	3
Fuel Type	Diesel
PTO Speed	540 RPM
Hydraulic System Type	Open center
Width	54.9 inches
Height	87.4 inches
Number of Gears	3-range
Tire Size (Front)	25x8.50-14
Tire Size (Rear)	11.2-24

Summary

Safe Operation Guidelines

Pre-Operation Checks and Precautions

Key checks and precautions before starting tractor operation.

CAB and ROPS Safety Considerations

Safety considerations for CAB and ROPS installations.

Tractor Safety for Children

Precautions to protect children around the tractor.

Safe Operation on Slopes and Inclines

Safe practices for operating on inclines and slopes.

Safe Road Driving Procedures

Guidelines for safe road operation and traffic rules.

Safe Tractor Parking Procedures

Power Take-Off (PTO) Operation

PTO Select Lever Functionality

Selecting PTO speed and position.

PTO Clutch Lever for LX2610/LX3310

Engaging and disengaging the PTO clutch.

PTO Clutch Lever for LX2610SU

Engaging and disengaging the PTO clutch for LX2610SU.

PTO Shaft Cover and Cap Safety

Specifications Overview

ROPS Model Specification Table

Technical data for ROPS model tractors.

CAB Model Specification Table

Technical data for CAB model tractors.

Implement Attachment Limitations

Implement Specification Details

Specifications for various tractor implements.

Instrument Panel and Controls

Switches and Hand Controls Overview

Identification and location of tractor switches and levers.

Instrument Panel Indicators Explained

Overview of the tractor's instrument panel indicators.

ROPS Model Foot and Hand Controls

Location of controls for ROPS model tractors.

CAB Model Foot and Hand Controls

Location of controls for CAB model tractors.

Pre-Operation Check

Daily Pre-Operation Inspection Checklist

Daily inspection items to ensure safe operation.

Engine Operation Guide

Diesel Particulate Filter (DPF) Muffler System

Details on the Diesel Particulate Filter system.

DPF Regeneration Process Overview

Steps for initiating and managing DPF regeneration.

Auto DPF Regeneration Procedure

How to use the automatic DPF regeneration mode.

Regeneration Inhibit Mode Procedure

How to use the DPF regeneration inhibit mode.

Parked DPF Regeneration Procedure

Steps for performing parked regeneration of the DPF.

DPF Regeneration Tips

Advice and tips for successful DPF regeneration.

Engine Starting Procedures

Engine Operation in Freezing Conditions

Guidelines for operating the engine in cold weather.

Engine Shutdown Procedures

Procedures for safely shutting down the engine.

Engine Warm-Up Procedures

Steps for warming up the engine properly.

Jump Starting the Tractor Battery

Instructions and warnings for jump-starting the tractor battery.

Tractor Operation Guide

New Tractor Break-In Procedures

Procedures for breaking in a new tractor.

Foldable ROPS Operation and Safety

Safe operation and handling of foldable ROPS.

Operator Position and Seat Adjustment

How to adjust the seat and controls for comfort and safety.

Seat Belt Safety and Use

Importance and use of the seat belt.

Brake Pedal Operation and Safety

Understanding and using the tractor's brake pedals.

Parking Brake Lever Engagement

How to engage and disengage the parking brake.

Range Gear Shift Lever Operation

Shifting the range gear lever for different speeds.

Front Wheel Drive Lever Operation

Engaging and disengaging the front wheel drive.

4WD Usage Guidelines

Speed Control Pedal Usage

Using the speed control pedal for forward and reverse movement.

Speed Set Lever Functionality

Cruise Control Lever Functionality

Stopping the Tractor

Checks During Tractor Operation

Checks to perform while operating the tractor.

Engine Low Temperature Management

Easy Checker™ Indicator Guide

Interpreting the Easy Checker™ system indicators.

Coolant Temperature Gauge Monitoring

Monitoring engine coolant temperature.

Parking the Tractor

Tractor Operating Techniques

Differential Lock Usage and Safety

Using the differential lock for traction and its safety implications.

Safe Road Driving of the Tractor

Guidelines for safe road driving.

Safe Operation on Slopes and Rough Terrain

Safe operation on uneven or sloped ground.

Safe Tractor Transport Methods

PTO (Power Take-Off) System

PTO Operation Guidelines

Instructions for operating the tractor's Power Take-Off.

3-Point Hitch and Drawbar System

3-Point Hitch Setup Guide

Steps for setting up the 3-point hitch for implements.

Lower Link Hole Selection Guide

Hydraulic Unit Overview

3-Point Hitch Control System

Controls for the 3-point hitch system.

Position Control for 3-Point Hitch

Adjusting the working depth of implements.

3-Point Hitch Lowering Speed Control

Controlling the speed of implement lowering.

Auxiliary Hydraulic Systems

Additional hydraulic system capabilities.

Hydraulic Block Type Outlet Usage

Dual Remote Hydraulic Control System

System for controlling external hydraulic devices.

Hydraulic Control Lever and Hose Connections

Rear Hydraulic Outlet Operation

Loader/Remote Control Valve Lever Operation

Operating loader and remote hydraulic control valves.

Remote Hydraulic Control System Details

Details on remote hydraulic control systems.

Remote Control Valve Operation

Remote Control Valve Lever Operation

Hydraulic Control Unit Use-Reference Chart

Chart for using hydraulic controls with various implements.

Tires, Wheels, and Ballast

Tire Inflation Pressure Guide

Wheel Tread Adjustment

Ballast Addition for Stability

Adding ballast for stability and traction.

Front Ballast Installation Guide

Rear Ballast Addition

Liquid Ballast in Rear Tires

CAB Operation and Features

Tractor Door and Window Operation

Emergency Exit Procedures from CAB

Procedures for emergency exit from the CAB.

Air Conditioner System Overview

Operation and controls for the air conditioning system.

Climate Control Panel Overview

General Air Conditioning Operation

Windshield Defrost and Demist

Rear Window Defogger Operation

Maintenance Schedule

Service Intervals Overview

Scheduled maintenance tasks based on operating hours.

Periodic Maintenance Tasks

Hood Opening Procedures

Daily Pre-Operation Checks

Daily checks to ensure the tractor is ready for operation.

Walk Around Inspection Procedure

Visual inspection of the tractor before starting.

Fuel Check and Refueling Safety

Procedures for checking fuel and refueling safely.

Water Separator Check [LX3310]

Engine Oil Level Check

Ensuring the engine oil level is correct.

Transmission Fluid Level Check

Ensuring the transmission fluid level is correct.

Engine Coolant Level Check

Ensuring the engine coolant level is correct.

DPF Muffler Inspection [LX3310]

Instrument Panel Checks

Seat Belt and ROPS Condition Check

Checking the condition of seat belts and ROPS.

Electrical Wiring and Battery Cable Checks

Lubricating Grease Fittings

Engine Start System Safety Check

Testing the tractor's engine start system safety features.

Wheel Bolt Torque Check

Ensuring wheel bolts are tightened to specification.

100-Hour Maintenance Schedule

Battery Condition Check

Battery Charging Procedures

Air Cleaner Primary Element Cleaning

Fuel Filter Cleaning [LX2610/LX2610SU]

Fan Belt Tension Adjustment

Brake Pedal Adjustment Procedure

200-Hour Maintenance Schedule

Engine Oil Filter Replacement

Replacing the engine oil filter cartridge.

Engine Oil Change Procedure

Procedure for changing the engine oil.

Transmission Oil Filter Replacement

Replacing the transmission oil filter.

Front Wheel Toe-in Adjustment

400-Hour Maintenance Schedule

Water Separator Replacement [LX3310]

Transmission Fluid Change Procedure

Procedure for changing transmission fluid.

Hydraulic Oil Filter Replacement

Replacing the hydraulic oil filter.

Fuel Filter Replacement [LX3310]

Fuel Filter Replacement [LX2610/LX2610SU]

Front Axle Pivot Adjustment (4WD)

Engine Valve Clearance Adjustment

Air Cleaner Element Replacement

Cooling System Flush and Coolant Change

Flushing and changing the engine coolant.

DPF Muffler Cleaning [LX3310]

Radiator Hose and Clamp Inspection

Engine Overheating Countermeasures

Fuel Line Inspection

Radiator Hose Replacement

Differential Pressure Sensor Hose Replacement [LX3310]

Troubleshooting Common Issues

Engine Troubleshooting Guide

Diagnosing and resolving engine-related problems.

Powertrain Troubleshooting Guide

Diagnosing and resolving powertrain errors.

Related product manuals