Kubota LX3310 - Powertrain Trouble Shooting

POWERTRAIN TROUBLE SHOOTING
If something is wrong with the powertrain, the master system warning indicator starts blinking and the error code
shown below is displayed on the liquid crystal display, indicating the location of the trouble. If an error code appears,
immediately contact your local KUBOTA Dealer for repairs.
(1) Master system warning indicator
(2) Error code
LX3310
Displayed error code Trouble Operator's action
“Err2”
Fuel sensor trouble
Contact your local KUBOTA Dealer.
“Err3”
Meter panel memory reading trouble
“E-84”
Throttle sensor trouble
“E-93”
Starter relay trouble
“E-94”
OPC output trouble
“E-21”
CAN communication trouble
“Err21”
CAN communication trouble
“E-40”
Sensor supply trouble
“E-30”
Accelerator adjustment trouble
LX2610/LX2610SU
Displayed error code Trouble Operator's action
“Err1”
Water temperature sensor trouble
Contact your local KUBOTA Dealer.
“Err2”
Fuel sensor trouble
“Err3”
Meter panel memory reading trouble
TROUBLESHOOTING POWERTRAIN TROUBLE SHOOTING
144
LX2610,LX3310