EasyManuals Logo

Kubota ZD221 User Manual

Kubota ZD221
95 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
OPERATING THE ENGINE12
ENGLISH
A Do not depress the hydraulic lift control pedal.
When the engine is off, depressing the hydraulic lift
control pedal (UP or DOWN) will lower the implement.
3. Make sure that the PTO lever is in the
"DISENGAGED" (OFF) position.
(1) PTO lever "ENGAGED" (ON)
"DISENGAGED" (OFF)
4. Place the motion control levers in the
"NEUTRAL LOCK" position.
(1) Motion control lever (LH)
(2) Motion control lever (RH)
(A) "NEUTRAL LOCK"
Position
(B) "NEUTRAL" Position
(held by hands)
(C) "CREEP" Position
(hands off)
(D) "FORWARD"
(E) "REVERSE"
5. Release the hydraulic lift control pedal
to the "DOWN" position.
(1) Hydraulic lift control pedal Depressing: "UP"
Release: "DOWN"
6. Set the throttle lever 1/2 way forward.
(1) Throttle lever "FAST"
"SLOW"
7. Insert the key into the key switch and
turn clockwise one notch.
Make sure the Easy Checker (TM) lights
are ON.

Table of Contents

Questions and Answers:

Kubota ZD221 Specifications

General IconGeneral
StyleZero Turn
ColorRed
Cutting Width48/54 in
Cutting Height1-5 in
Cutting Method-
Number of Blades3
Drive SystemCruise Control (Hydrostatic)
Case Size: U1RCCA: 450A
Noise Level-
FeaturesSuperior Quality Cut
Accessories-
Motor / Engine ModelKubota D782
Power Output-
Cylinders3
Generator-
Power / Fuel TypeDiesel
Fuel Tank Volume23.0 liters (6.1 US gal.; 5.1 Imp. gal)
SAE 5W30 (below 32°F/0°C)SAE 5W30
w/o Filter: 44 oz. (11.32 Imp. qt.)
Weight and Dimensions IconWeight and Dimensions
Depth2130 mm (83.9 in)
Height1770 mm (69.7 in)
Width1210 mm (47.6 in)
Net Weight550 kg (1213 lbs)

Related product manuals