Kubota ZD221 User Manual

31TIRES AND WHEELS
ENGLISH
TIRES AND WHEELS
TIRES
To avoid personal injury:
A Do not attempt to mount a tire. This should be
done by a qualified person with the proper
equipment.
A Always maintain the correct tire pressure.
Do not inflate tires above the recommended
pressure shown in the Operator's Manual.
A Inflation pressure in front tires rises quickly
when using compressed air.
Never operate machine with a loose rim, wheel, or
axle.
A Whenever bolts are loosened, retighten to
specified torque.
A Check all bolts frequently and keep them
tightened.
BInflation Pressure
Though the inflation pressure is factory-set to the
prescribed level, it naturally drops slowly in the course of
time. Thus, check it everyday and inflate as necessary.
WHEELS
A When re-fitting a wheel, tighten the wheel bolt to the
following torques then recheck after traveling 200 m
(200 yards) changing directions several times.
Wheels with beveled or tapered holes:
Use the tapered wheel bolt.
Tire sizes
Recommended Inflation
Max. Pressure
Front
13 x 5.0 - 6,
4PR Rib
276 kPa
(2.8 kgf/cm , 40psi)
Rear
23 x 10.5 - 12,
4PR Turf
140 kPa
(1.4 kgf/cm , 20psi)
(1) Ground (A) "INSUFFICIENT"
(B) "NORMAL"
(C) "EXCESSIVE"

Kubota ZD221 Specifications

General

Style	Zero Turn
Color	Red
Cutting Width	48/54 in
Cutting Height	1-5 in
Cutting Method	-
Number of Blades	3
Drive System	Cruise Control (Hydrostatic)
Case Size: U1R	CCA: 450A
Noise Level	-
Features	Superior Quality Cut
Accessories	-
Motor / Engine Model	Kubota D782
Power Output	-
Cylinders	3
Generator	-
Power / Fuel Type	Diesel
Fuel Tank Volume	23.0 liters (6.1 US gal.; 5.1 Imp. gal)
SAE 5W30 (below 32°F/0°C)	SAE 5W30
w/o Filter: 44 oz. (1	1.32 Imp. qt.)

Weight and Dimensions

Depth	2130 mm (83.9 in)
Height	1770 mm (69.7 in)
Width	1210 mm (47.6 in)
Net Weight	550 kg (1213 lbs)