6
AFTER-ASSEMBLY CHECK
1. After assembling, check the machine based on the
following check list and check the safety switches.
AFTER-ASSEMBLY CHECK LIST Inspector:
Model number: Machine number: Inspection date:
Division Inspection item Results
Lubrication
1. Engine oil amount correct?
2. Transmission fluid amount correct?
3. Mower gear case oil amount correct?
Cooling water
1. Radiator coolant amount correct?
2. Recovery tank filled with correct amount of coolant?
Electrical system
1. All instruments (Water temperature gauge, fuel gauge and hour meter) functioning?
2. Easy Checker(TM) functioning?
3. Battery cable properly connected?
4. Charged enough (proper specific gravity)?
Running
1. Parking brake well responsive?
2. Maintenance lift system lever functioning?
3. Acceleration lever working smoothly?
4. HST system working smoothly?
5. Motion control levers neutral position ensured with levers out.
6. PTO on / off operation smooth?
7. Mower up / down operation smooth?
8. Key switch functioning for smooth engine stop?
9. Safety devices functioning?
Others
1. No oil leak and water leak?
2. Check inflation pressure of tires.
3. Do safety switches operate correctly? (See Check the safety switches.)
4. All accessories (operator's manual, key switch, etc.) on hand?
To Next Page
Loading...
