KUHN GMD883 - Cutterbar Oil Change

Maintenance and storage
Disc mower
GMD883
63
1. Frequency chart
After the first
10 hours of use
Every 50 hours
Every 200
hours or at the
end of the
season
Lubrication
Oil change:
- Cutterbar.
33
- Side gearbox.
3
- Central gearbox.
3
Grease:
- Offset cylinder pivot pins.
3
- Lift cylinder pivot points.
3
- Offset linkage pivot points.
3
- Transport stops and stop pins.
3
- Carrying frame pivot points.
3