Power harrow
26
HR6004DR
Machine specifications
Front soil loosening share
The front soil loosening share brakes up the strip of land
between the two half-harrows. The front soil loosening
share is fitted on the lower crossbar of the central frame.
3. Required equipment
Intermediate PTO shaft 1
The machines are factory fitted with one of the following
PTO shafts:
(Part no. 4600654)
1 3/8’’ - 21 spline pto shaft.
or
(Part no. 4600655)
1 3/4’’ - 6 spline pto shaft.
or
(Part no. 4600656)
1 3/4’’ - 20 spline pto shaft.
Power harrow blades
The machines are factory fitted with one of the following
blades:
Part no. K2500090 and Part no. K2500100
Standard left and right blade.
or
Part no. K2501120 and Part no. K2501130
Left and right OPTIMIX blade.
or
Part no. K2500260 and Part no. K2500270
Left and right DURAKUHN blade.
To Next Page
Loading...