KUHN HR6004DR - Putting into Service; Coupling and Uncoupling

Putting into service
Power harrow
HR6004DR
29
$Putting into service
1. Coupling and uncoupling
 Description of coupling elements
- 2 hitch pins diameter 37 mm (1.45’’) for the lower link
arms.
- A top link hitch pin diameter 31 mm (1.22’’).
- A PTO shaft.
- 2 hydraulic hoses pressurizing the half-harrow lift
cylinders.
- A 7-pin plug.
- A release cord.

Preparing the tractor
The machine adapts to tractors fitted with a 3 point
linkage category 3.
The tractor nominal PTO speed must be 1000 min
-1
.
The tractor must be fitted with a double acting hydraulic
outlet.
The tractor must be fitted with lower link
stabilizers.
The front axle load (1) must never, under any
circumstances, be less than 20% of the
tractor's unladen weight.