Maintenance and storage
Power harrow
HR6004DR
81
5. Storage
At the end of each season
- Clean the machine with a garden hose.
- Check and replace worn or damaged blades.
- Check and replace worn or damaged scraper plates.
- Touch up any areas of damaged paintwork.
- Put the machine under cover in a dry place.
- Remove and service the PTO shaft. Follow the
instructions in the PTO shaft operating manual.
At the start of each season
- Re-read the operators' manual.
- Check that the lighting equipment is clean.
- Check that all nuts and bolts are sufficiently tightened.
- Make sure that all protection devices are in place and
in good condition.
To Next Page
Loading...