Power harrow
72
HR6004DR
Maintenance and storage
Cooling system tank
From the working position:
- Operate the machine for a few minutes so that the oil
flows through the whole circuit (Minimum: 5 minutes).
- Place the machine on level ground.
- Remove level plug (1).
- Check the oil level.
- Clean and replace the oil level cap (1). Replace it if
necessary.
Checking the oil level:
- Remove level plug (1).
• The cooling system tank must be filled to the brim.
- Clean and replace the oil level cap (1). Replace it if
necessary.
If the oil level is insufficient, check the whole
circuit for a leak and contact your Kuhn
authorized dealer.
To Next Page
Loading...