Trouble shooting guide
Power harrow
HR6004DR
83
Machine clogging due to
ground build up between rotors
and levelling bars
Rear levelling bars mounted in
wet conditions
Remove rear levelling bars
Clogging of the Maxicrumbler
roller
Wet conditions, too high load
on the roller
use Packer PK2 roller or
Maxipacker roller
Incorrect Packer roller
functioning (clogging, jamming
or soil build-up)
Incorrectly adjusted or worn out
scraper plates
Adjust each scraper plate
Scrapers jammed by trash
Clean scrapers by pivoting
them rearwards
Scraper bars incorrectly
positioned
Scraper bars must always be in
its furtherst forward position.
Wear compensation can only
be obtained by sliding the
scraper plates forward
individually
Ridging at the centre of the
machine
Rear levelling share incorrectly
positioned
Adjust rear levelling share
height
To Next Page
Loading...