Power harrows
50
HRB353D - 403D
Instructions for transport
$Instructions for transport
1. Putting the machine into transport
position
The transport position is obtained by raising the tractor's
three-point linkage.
The machine is in transport position.
2. Conformity with the road regulations
Check that reflectors are clean.
Before placing the machine into transport
position:
Wait until the rotating parts have come to a
complete stop.
Never engage the tractor PTO drive when the
machine is in transport position.
Before driving the machine on public roads,
ensure that the machine complies with
current highway code regulations.
During transport, adapt the travel speed to
suit the road conditions.
To Next Page
Loading...
