Power harrows
68
HRB353D - 403D
Optional equipment
The track eradicators are fitted with an overload
mechanism should they encounter an obstacle:
- With traction bolt overload mechanism:
Bolt breaks: Part no. 80131051
Nut: Part no. 80201030
- With spring overload mechanism:
The track eradicator automatically resets to its work
position after having cleared the obstacle.
- Each track eradicator share is reversible for increased
service life. Replace it if necessary.
Torque: 10 daN m (74 lbf ft).
Track eradicators with the spring overload
mechanism are recommended for work in
difficult or stony grounds.
To Next Page
Loading...
