Trouble shooting guide
Power harrows
HRB353D - 403D
85
Machine clogging due to
ground build up between rotors
and levelling bars
Rear levelling bar mounted in
wet conditions
Remove rear levelling bar
Incorrect Packer roller
functioning (clogging, jamming
or soil build-up)
Incorrectly adjusted or worn out
scraper plates
Adjust each scraper plate
Scrapers jammed by trash
Clean scrapers by pivoting
them rearwards
Scraper bar incorrectly
positioned
Scraper bars must always be in
the furtherst forward position.
Wear compensation can only
be obtained by sliding the
scraper plates forward
individually
Clogging of the Maxicrumbler
roller
Wet conditions, too high load
on the roller
use Packer PK2 roller or
Maxipacker roller
To Next Page
Loading...
