Kulzer HiLite power 3D - 1 Scope of Applicability; General; Designation and Type of Device; EU Statement of Conformity

- 2 -
GB
DE
GB
FR
ES
IT
PT
NL
SE
DK
NO
FI
GR
1 Scope of applicability
1.1 General
HiLite
®
power is a registered trademark of Kulzer GmbH.
Author f48618
These working instructions apply to:
Order no. Type Features Date
66069514
HiLite
®
power 3D, light polymerisation device
2017-07 / 66069514/11
1.2 Designation and type of device
Designation of the machine: Type of machine: Valid from Serial number:
Light polymerisation device
HiLite
®
power 3D
2017-08-XXXX-ff
1.3 EU Statement of conformity
Herewith we, Kulzer GmbH, Leipziger Straße 2, 63450 Hanau (Germany), confirm solely responsibility that the designated
product in paragraph 1.2 due to its intended use and the version marketed by us corresponds to the relevant basic safety and
health requirements of the EC guidelines and harmonized standards.
Applied EU directives:
Low voltage directive 2014/35/EU
EMC directive 2014/30/EU
Applied harmonzied standards:
EN 61010-1:2011-07
EN 61010-2-010:2015-05
EN 61326-1:2013-07
The declaration shall become invalid if any modification we have not authorized is made to the machine.
2 Instructions on using the unit safely
2.1 Explanation of Symbols
Symbols Accompanying word(s) Explanation
CAUTION Safety-relevant chapters and sections in these working instructions
have been marked with this symbol.
NOTE Information within the working instructions on the optimum use
of the unit.
HOT SURFACE Hot surface.
Risk of getting burned.
ELECTRIC SHOCK Caution electric shock.
Risk of fatal injury if instructions are not followed.
DISCONNECT FROM MAINS Danger of electric shock when unit is opened.
Unplug the unit before opening it.
2.2 Transport damage
Check the device for damage after receiving it. If it is damaged, report this to the transportation company within
24 hours of delivery.
Under no circumstances, work with a damaged device.