Kulzer HiLite power 3D - 4 Scope of Delivery; 5 Structure and Function; Control and Display Elements

- 4 -
GB
DE
GB
FR
ES
IT
PT
NL
SE
DK
NO
FI
GR
CAUTION
Do not use the device for the jobs listed below:
▀
Do not use the device to warm food.
▀
Do not operate the device without first inserting a filter, and do not place objects on the filter disc.
▀
Do not use the device with a heavily-soiled light reflector and / or if the bottom holes are closed – otherwise,
the heat will not be dissipated.
We recommend that you do not use the device for 30 seconds to 60 seconds between each polymerisation operation
of 90 seconds or 180 seconds, for example, so that the device may cool down (ventilator running).
4 Scope of delivery
Check that all components are in perfect condition on delivery of the device.
If you wish to make a complaint, contact your supplier.
Delivery unit:
HiLite
®
power 3D
Lamp module with flash lamp
Power cord (Europe, USA / Japan)
Chip card
Filter disc
Light reflector
Object holder
2 x “Model tray”
5 Structure and function
5.1 Control and display elements
1) Control panel
5) Filter
6) Drawer for filter
7) Maintenance flap
2) Light reflector
3) Object holder
4) Drawer for polymerisation goods
1
4
6
2
7
5
3