Kurzweil KP-100 - Function Menu; Reverb Effect Settings; Chorus Effect Settings

Chorus Level
1. Press and hold the [SHIFT] button and then repeatedly press the
[FUNCTION] button to select chorus level menu. The LCD displays
“xxx Chr Lev”, adjustable range: 0-32.
Use the [+/YES]/ [-/NO] button or data dial to change chorus level.
2. Press the [+/YES] and [-/NO] buttons simultaneously to restore its
default setting: 0.
Reverb Type
1. Press and hold the [SHIFT] button and then repeatedly press the
[FUNCTION] button to select reverb type menu. The LCD displays
“004 RevHall1”.
Use [+/YES]/ [-/NO] button or data dial to change reverb type. The
default setting is Hall 1.
Reverb Level
1. Press and hold the [SHIFT] button and then repeatedly press the
[FUNCTION] button to select reverb level. The LCD displays “xxx
Rev Lev”, adjustable range is: 0-32.
Use the [+/YES]/ [-/NO] button or data dial to change reverb level,
2. Press the [+/YES] and [-/NO] buttons simultaneously to restore its
default setting: 20.
Chorus Type
1. Press and hold the [SHIFT] button and then repeatedly press the
[FUNCTION] button to select chorus type menu. The LCD displays
“004 ChrGMCr2”, Use the [+/YES]/ [-/NO] button or data dial to
change chorus type, the default setting is GM Chorus 2.
Function Menu
18
No.
1
2
3
4
5
6
7
8
9
10
LCD
RevRoom1
RevRoom2
RevRoom3
RevHall1
RevHall2
RevHall3
RevChrh1
RevChrh2
RevDelay
RevPnDly
Reverb Type
Room 1
Room 2
Room 3
Hall 1
Hall 2
Hall 3
Church 1
Church 2
Delay
Pan Delay
No.
1
2
3
4
5
6
7
8
LCD
ChrChrs1
ChrChrs2
ChrGMCr1
ChrGMCr2
ChrFlgr1
ChrFlgr2
ChrRtry1
ChrRtry2
Chorus Type
Chorus 1
Chorus 2
GM Chorus 1
GM Chorus 2
Flanger 1
Flanger 2
Rotary 1
Rotary 2
SHIFT
SHIFT
SHIFT
SHIFT
FUNCTION
PIANO
FUNCTION
PIANO
FUNCTION
PIANO
FUNCTION
PIANO