DSP
The DSP simulates sounds in the real environment. With the DSP
effect, you can add ambiance and depth to your performance in a
variety of ways.
1. Press and hold the [SHIFT] button and then press the [DSP] button
to set the DSP effect on. The DSP indicator lights up on LCD. The
DSP effect is automatically activated when turning on the instrument.
2. Press and hold the [SHIFT] button and then press the [DSP] button
again to turn DSP effect off.
Transpose
1. Press and hold the [SHIFT] button and then press the
[TRANSPOSE] button to enter the transpose menu. The LCD
displays “xxx Transpos”.
2. Use [+/YES]/ [-/NO] button or data dial to change transpose value,
adjustable range:-12~ +12, the default value is: 0.
Harmony
The harmony function will automatically add harmony effect to the notes
you play in the right-hand section, which gives you a rich and harmonic
expression.
1. Press the [CHORD] button to turn on the A.B.C. function.
2. Press the [HARMONY] button to turn the harmony effect on.
3. Play a chord in the left hand section.
4. As soon as you play in the right hand section, it will automatically
add harmony effect to the notes you play.
Note:
1. Harmony cannot be turned on when the Full Range fingering mode
is selected.
2. The harmony types of “1+5”, “Octave 1” or “Octave 2” are always
available. Other types of harmony will respond only when the A.B.C.
is ON.
21
Effect Related Settings
MIXER
T
RANSPOSE
SHIFT
SHIFT
To Next Page
Loading...
