The Registration Memory feature can make your performance more easy
and efficient. It allows you to save virtually all panel settings to a Registra-
tion Memory setting, and you can instantly recall them by pressing a
single button.
Registering the Panel Setting
1. There are 8 memory banks, and each bank has 4 memories (M1-M4).
2. Holding down the [STORE] button, then press one of the memory
buttons [M1] - [M4]. Note that new settings will replace the previous
memory data.
3. Parameters that can be saved to the registration memory:
Voice: main voice, dual, lower, DSP, mixer.
Accompaniment: style, tempo, accompaniment on/off.
Function: touch, some parameters in the function menu.
Recalling the Registered Panel Settings
1. Press one of the memory buttons: [M1] - [M4]. For example, press
[M2], and the panel settings stored in the memory 2 of bank 1 are
recalled.
Note:
Registration data cannot be recalled when the One Touch Setting function
is on.
Selecting a Registration Bank
1. Press the [BANK] button, the LCD displays “00X Mem Bank”.
2. Press the [BANK] button repeatedly to select a bank from 1 to 8.
22
Register Memory
BANK
R
ECORD
To Next Page
Loading...
