9-16
Master Mode
MIDI Receive (RECV)
MIDI Receive (RECV)
The MIDI Receive page is where you define the PC3LE’s response to incoming MIDI signals
(with one exception pertaining to Quick Access mode, which we’ll explain later).
Basic Channel
The basic channel determines which channel will always be available to receive MIDI
information. Depending on the MIDI receive mode (below), the Basic channel may be the only
receiving channel, or one of several.
MIDI Receive Mode (MIDI Mode)
The MIDI Mode parameter determines the MIDI receiving capabilities of the PC3LE. When set
to Omni, the PC3LE responds to incoming MIDI events on all MIDI channels, and plays them
on the current channel. This is normally used for diagnostic purposes only.
At a setting of Poly, the PC3LE responds only to events that are sent on the same channel as the
PC3LE’s current MIDI channel (the one displayed on the top line of the Program mode page). In
Poly mode, the currently selected channel is always the basic channel, so if you change channels,
the basic channel changes accordingly.
With a value of Multi (the default), the PC3LE responds to events on all active channels. This is
the mode you’ll use when you’re driving the PC3LE with a sequencer, since you can play a
different program on each channel.
Parameter Range of Values Default
Basic Channel 1 to 16 1
MIDI Mode Omni, Poly, Multi Multi
Velocity Map Velocity Map List 1 Linear
Pressure Map Pressure Map List 1 Linear
Program Change Mode (PrgChgMode) Program Change Type List Extended
System Exclusive ID (SysExID) 0 to 127 0
Bank Select Ctl 0, Ctl 32, Ctl 0/32 Ctl 0/32
All Notes Off Normal, Ignore Normal
Local Keyboard Channel (LocalKbdCh) None, 1 to 16 None
To Next Page
Loading...
