Storage Mode
The STORE Page
11-5
The STORE Page
Pressing the STORE soft button calls up the Store page, where you can select user objects from
RAM to store in the current storage device. The page appears as shown below:
At the top right of the page, the display shows how much memory is available in the current
storage device. Press one of the Store page’s three soft buttons. Below is a description of the
function of each soft button:
Select Allows you to select specific user objects to store, see The Store Advanced Page below
for details.
SvAll Saves all user objects.
Cancel Exits the Store page and returns you to the Storage mode page.
You cannot store ROM objects. If you wish to store a ROM object, such as a program, you must
first save it internally as a user RAM program. When one or more objects are saved, the PC3LE
saves a file with a (.PLE) extension. This enables the PC3LE to recognize it as a Kurzweil file
when it examines the directory. Note that although .PLE files are “collections” of objects, you
can load individual objects if you want to. See Loading Individual Objects on page 11-6.
The Store Advanced Page
Pressing the Advnce soft button calls up the Store Advanced page, on which every user-defined
object—as well as its object type—on the PC3LE is displayed and selectable for storage. On this
page, you can select and store objects individually. The objects are organized by numerical ID
and object type.
There are five soft buttons on the Store Advanced page:
Select Select the highlighted object. An asterix (*) appears between the ID and object type
of selected objects.
Next Scroll to next entry. Same function as pressing the down cursor button or the +
button, or turning the Alpha Wheel one click clockwise.
Type Jump to next object type.
Store Store the selected objects to the current storage device. Pressing this soft button calls
up the Select Directory dialog.
Cancel Exits the Store Advanced page and returns you to the Store page.
To Next Page
Loading...
