10-12
Song Mode and the Song Editor
Song Mode: The MIXER Page
Song Mode: The MIXER Page
The MIXER page shows the current settings for the program number, panning, and volume of
each track (in groups of 8). The selected track number, as well as the range of tracks displayed on
the page, are displayed in the upper right-hand corner of the screen. Use the Chan/Zone buttons
or the cursor buttons to change the currently selected track. To get to other pages of tracks,
continue scrolling past the first or last track on the page. The bottom part of the screen displays
current settings for the selected track including program number and name, panning, and
volume.
Changing the settings for a track’s program, volume, or panning while the sequencer is
recording will record these changes, viewable in the corresponding track’s EVENT page. Upon
playback, these automated mixer parameters will display their changing values in real-time on
the MIXER page. Below is an example MIXER page:
**Uneditable, these values are an expanded view of the mixer values for the currently selected track, which
can be edited in the first three rows of the MIXER page.
The
Rec
,
Play
, and
Stop
Soft Buttons
These soft buttons function as described in The Rec, Play, and Stop Soft Buttons on page 10-7.
The
Keep
Soft Button
Pressing the Keep soft button captures the current settings for each track’s program, panning,
and volume as the initial settings. Remember to save if you want these change to be permanent!
Parameter Range of Values Default
Current Pan 0 to 127 None
Current Volume 0 to 127 None
Current Program Program List None
Selected Track (Trk) 1 to 16 1
For Selected Track
Current Program** Program List
(Current Program)
Current Volume** 0 to 127 127
Current Pan** 0 to 127 64
To Next Page
Loading...
